TOKYO MARUI - G36C Plus (Standard Type)

● Equipped with FETs : Equipped with a switch that combines mechanical and FET. Compared to a mechanical switch, the current loss generated at the contact is reduced, and the response from pulling the trigger to firing the BB bullet is improved. In addition, the durability of the switch part is also improved.

● PLUS system : Developed the "PLUS system" in which a microcomputer (MCU = microcontroller unit) comprehensively monitors and controls FETs, batteries, and motors. In addition to controlling the rotation of the motor, it is a system that also has safety, such as detecting damage and abnormalities in various parts and stopping operation.

● Black finish : The receiver uses a black paint that suppresses gloss.

● KAC Type Rail / Front & Rear Sights :Equipped with a medium length rear sight integrated mount rail. Both the front and rear sights are foldable, allowing you to finely adjust the impact point up and down with the front sight and left and right with the rear sight..

● Cheek Piece : The cheek piece consists of 4 pieces. The height can be adjusted in 4 levels by combining cheek inner, cheek outer, and two spacers.

● Compatible with various muzzle options : If you remove the new aluminum flash hider, you can install muzzle options such as a silencer with a 14mm reverse screw specification.

● Realistic see-through magazine : A magazine with a capacity of 50 rounds and a reproduction of the internal 5.56mm x 45 bullets is included. It is possible to connect multiple magazines using the joint part on the side.

ATTENTION : THIS REPLICA USES A BATTERY (MINI S) NOT INCLUDED.

Contents

- 1 Tokyo Marui G36C "PLUS"
- 1 Standard magazine (50 rds)
- 1 Safety cap
- 1 Sight adjustment tool
- 1 Hex wrench
- 1 User manual
- 1 BB loader tube
- 1 Cleaning rod
- etc

※ Impulse101 recommends the use of genuine Tokyo Marui MINI S Battery 8.4V NiMH 1300mAh (sold separately)